Description
MilCorr® VpCI® Shrink Film is a heavy-duty film that inhibits corrosion on multiple metal types through contact, barrier and vapor-phase protection. High ultraviolet light protection maintains the integrity of the film itself as well as the parts packaged within. It is effective in severe outdoor climates and can be heat-shrunk for a custom fit. Recyclable.
- 20′ x 210′ x 0.010” (6.1 x 64.1m x 250 microns)
- 10–12 mil (250–300 microns) film thickness
- 214 lbs. — ships LTL
- Price per roll
- Cortec item #21302962
Printed for identification
As of August 2026, Cortec prints product identification directly onto this film during production. VpCI®-126 Shrink and VpCI®-126 HP UV are printed with Cortec’s standard VpCI®-126 plates; MilCorr® carries its own MilCorr® print plate. The print lets you confirm at receiving — and on the wrapped unit months later — that you are looking at genuine Cortec® film and the correct grade. Formulation, specifications and part numbers are unchanged.
TYPICAL APPLICATIONS
• Military vehicles and equipment preservation
• Mothball preservation of industrial equipment
• Export packaging of expensive larger equipment
• Heavy equipment covers
• Recreational vehicle (boats, snowmobiles, etc.) preservation
• Pallet shrouds
CONFORMANCES AND TESTING
• MIL-PRF-22019 D and MIL-B-22020 D for barrier, flexible, sealable, volatile corrosion inhibitor treated materials
• NFPA 701-1999 Fire Test for Flame-Resistant Textiles and Films, Test #1: Pass
• German Military Standard TL-8135-002 (VIA Test): Pass
• ASTM G 53-93 UV Weathering Test: no corrosion or degradation of the film observed after 2,100 hours of exposure
• Cortec VIA Test, Razor Blade Test, SO2 Corrosion Test and F-12 Cycling Corrosion Test: Pass
APPLICATION INSTRUCTIONS
1. Measure unit and determine amount of film needed, allowing at least 12” overlap at all seams.
2. Lay out film in desired preparation area, making sure it is clean and dry.
3. Place vehicle or equipment on film.
4. Pad off any sharp edges and corners.
5. Wrap or shroud equipment with film.
6. Use shrink tape to attach loose ends onto film/equipment.
7. Carefully apply heat and shrink film to desired fit.
Typical shrink temperature range: 340°-440°F (171°-227°C)
Typical sealing temperature: 240°-320°F (116°-160°C)
PACKAGING AND STORAGE
Standard size is 20′ x 210′ x 0.010” sheeting. Widths up to 30′ (9.2m) are available from Cortec on request. Film should be stored indoors at ambient conditions, sealed in original packaging. Under these conditions, shelf life is up to 24 months.
MilCorr® VpCI® Shrink Film product data sheet (Cortec®)
Not sure which grade you need? Read the VCI shrink film buyer’s guide — it compares VpCI®-126, HP UV and MilCorr® by sun exposure and storage duration.
Clean it, then protect it: Corrosion protection works best on a properly cleaned part. Start with an aqueous parts washer and the right degreaser, then read Clean It, Then Protect It.
