Front-load parts washers are the workhorse of the industry — and most shops shopping for one are comparing three or four legacy American brands that all land in roughly the same price range. The Magido FLS Series is built to the same standard and consistently priced below them.
Solvent Recycling Systems supplies the Magido FLS Series — 100% AISI 304 stainless steel front-load cabinet washers with an automatic turntable, dual-height spray manifold, and PLC-free digital controls that keep the machine simple to run and simple to fix.
What you get in every FLS
- Automatic turntable with containment ring — keeps wash fluid where it belongs during the cycle.
- Removable parts tree — load fixtures once, drop the whole tree in and out.
- Auto water fill with low-level protection — the tank refills itself and shuts down before it runs dry.
- Oil skimmer — standard on every FLS, not an upsell.
- Removable chip basket — keeps swarf and debris out of the pump.
- Digital wash cycle timer + digital thermostat controller — set it and walk away.
The three sizes
| Spec | FLS-30 | FLS-35 | FLS-45 |
|---|---|---|---|
| Turntable diameter | 30" | 35" | 45" |
| Working height | 40" | 40" | 50" |
| Weight capacity | 1,200 lbs | 1,200 lbs | 1,500 lbs |
| Tank capacity | 60 gal | 70 gal | 130 gal |
| Pump power | 2 HP | 3 HP | 5.5 HP |
| Pump output | 40 GPM | 50 GPM | 75 GPM |
| Pump pressure | 45 PSI | 50 PSI | 60 PSI |
| Turntable drive | 7 RPM | 7 RPM | 7 RPM |
| Tank heater | 10 kW | 10 kW | 16 kW |
| Power requirement | 12 kW | 13 kW | 21 kW |
| Full load amps | 52A | 41A | 63A |
| Electric power | 230V, 1PH | 230V, 3PH (480V available) | 230V, 3PH (480V available) |
| Operating temp | 140°F | 140°F | 140°F |
| Overall dimensions | 50"×60"×72" | 55"×65"×72" | 64"×90"×81" |
| Net weight | 1,500 lbs | 1,700 lbs | 2,200 lbs |
Available options: programmable tank heater timer, stainless steam exhaust fan, stainless filtration, stainless drain pump.
Which size fits your shop
- FLS-30 — the entry point. Single-phase 230V means it runs on standard shop power, no special electrical work.
- FLS-35 — the middle ground for shops that outgrew a 30" turntable but don’t need the FLS-45’s tank capacity.
- FLS-45 — the production machine. 130-gallon tank and 75 GPM pump handle bigger parts and busier cycles.
Why shops are switching
Comparable American-built front-load cabinets from the legacy brands typically quote meaningfully higher for the same stainless construction and similar spec sheet. If you’re already quoting a front-load washer, get the FLS quote alongside it — same category, same duty cycle, different number at the bottom.
Comparing front-load washers? Send us your part size and cycle needs — we’ll tell you which FLS fits and what it actually costs next to what you’re already quoting.
