Description
The Magido Spira SP640 is a continuous rotary drum parts washer with integrated drying. Small loose parts — fasteners, stampings, turned components — feed into a rotating helical drum that carries them through a heated detergent wash and a hot-air drying section, then discharges them clean and dry at the far end. No baskets, no batching, no operator between loads.
With a 25″ diameter drum and up to 12.7 cubic feet of parts per hour, the SP640 suits high-volume production lines.
Key Features
- 25″ diameter helical auger drum, 98″ long
- Continuous throughput up to 12.7 cu ft/hr
- Hopper-fed in, clean and dry parts out — fully automatic
- Heated 130 gal wash tank with 4 hp pump
- Integrated hot-air drying section
- AISI 304 stainless steel construction
Magido Spira SP640 Specifications
| Series | Magido Spira 1b (wash + dry) |
|---|---|
| Drum diameter | 25″ |
| Drum length | 98″ |
| Production rate | Up to 12.7 cu ft/hr of parts |
| Wash tank | 130 gal |
| Pump | 4 hp |
| Drying | Integrated hot-air blow-off section |
| Construction | AISI 304 stainless steel |
Own a Spira? See our rotary drum parts washer preventative maintenance guide for the daily, weekly, and monthly service schedule, and browse Magido replacement parts — filter bags, blower cartridges, condenser kits, and more.
Applications
High-volume cleaning of fasteners, stampings, screw-machine and turned parts, cold-headed components, and any small loose part produced in bulk with oil, chips, or fines to remove.
Pricing & Lead Time
Every Magido aqueous parts washer is built to order from AISI 304 stainless steel and configured for your parts, throughput, and plant utilities. Contact Solvent Recycling Systems for current pricing, lead time, and a free cleaning-process evaluation.
Need spare parts for a Magido machine you already own? Browse our Magido parts washer replacement parts catalog.
Reviews
There are no reviews yet.