Heavy Duty Solvent Recycling Bags (3 Mil) 48-Gallon, 100 Pack
$2,059.00
Not sure this bag fits your recycler? Send us your recycler make/model and we’ll confirm the right size and mil before you order.
-
- Grade: Heavy Duty
- Thickness: 3 mil
- Best for: heavy paint solids, high-solids waste, high-temperature & vacuum distillation
- Size: 48-gallon, SR180
- Pack: 100 bags
- Fits: batch & vacuum solvent recyclers (ISTpure/Kresco, ECOpure, and others)
These bags fit our full line of solvent recyclers.
Tip: buying these regularly? A newer or larger recycler could cut your costs — see the ROI Calculator ›
Heavy Duty 3 mil solvent recycling bags sized for the Kresco / ISTpure SR180 solvent recycler. The thicker 3 mil film stands up to heavy paint solids, dried coatings, and the stress of high-temperature and vacuum distillation, where thinner bags can soften, pull, or tear before the cycle ends. Line the boiler, run your cycle, and lift the residue out clean — less mess, fewer failures, and a cleaner still chamber. 100 bags per pack. Also fits other batch recyclers of the same tank size — confirm your model.
Additional information
| Grade | Heavy Duty |
|---|---|
| Thickness | 3 MIL |
| Pack | 100 |
| Fits | Batch & vacuum solvent recyclers (ISTpure/Kresco, ECOpure, and others) |
| Size | 48-Gallon |
| Best for | Heavy paint solids, high-solids waste, high-temperature & vacuum distillation |
You must be logged in to post a review.
Technical Data: Solvent Recycler Bag Film
Our solvent recycling bags are made from a high-temperature film built for the inside of a solvent distiller: it holds up to the boiling point of the solvent, releases the dried residue cleanly, and resists the solvents you are recycling. This heavy-duty 3 mil bag uses the same film as our standard 2 mil bag at a heavier gauge; values below are from the film technical data sheet (reported for 2 mil).
| Material thickness | 3 mil |
| Continuous use temperature | 450°F / 232°C |
| Melting point (DSC) | 493°F / 256°C |
| Deflection temperature at 66 psi / 264 psi | 450°F / 180°F |
| Tensile strength at yield | 10.9 psi |
| Elongation at fail | 170% |
| Secant modulus | 435 psi |
| Specific gravity | 1.14 |
| Color | Blue tint or clear |
| Chemical resistance | Resistant to most solvents |
Values reported at 0.2% moisture. Fits IST, ISTpure, Kresco, Uni-ram, BECCA, Sidewinder and other batch solvent recyclers of the matching tank size; see the bag size guide above or ask us which bag fits your recycler.
Reviews
There are no reviews yet.