Description
The Kresco 1/2″ air-operated diaphragm pump is the transfer pump fitted to Kresco SR Series solvent recyclers and industrial parts washers. It moves solvents, water, slurries, waste oil and paint with nothing but shop air: no electric motor in the hazardous area, no seals to burn out running dry, and a PTFE diaphragm and stainless balls that stand up to the same solvents the recycler does. Use it as the dirty-solvent feed pump on an SR30 or SR60 (which load manually unless a pump kit is ordered), as a direct replacement for the pumps on an SR120, SR180 or SR240, or as a general-purpose solvent transfer pump between drums and tanks.
Request pricing or call (847) 833-7010 with your recycler model and serial number.
Performance
| Maximum flow | 15 gpm |
| Maximum air pressure | 120 psi |
| Maximum static suction head | 23 ft H2O |
| Maximum suction lift, dry / wet | 15 ft / 31 ft H2O |
| Maximum solids | 1/8″ |
| Displacement per stroke | 0.03 gal (0.10 L) |
| Sound level | 80 dBA with muffler |
Connections and Dimensions
| Liquid ports | 1/2″ FNPT (FBSPT); suction and discharge on the right |
| Air inlet / exhaust | 1/4″ FNPT / 3/8″ FNPT |
| Size (H × W × D) | 11.2″ × 10.3″ × 6.4″ |
| Weight | 10 lb aluminum; 20 lb stainless steel |
Construction
| Wet end | Aluminum (stainless steel available) |
| Air end | Aluminum, glass-filled polypropylene |
| Diaphragm | PTFE |
| Balls / seats / O-rings | Stainless steel / nylon / PTFE |
| Hardware | Stainless steel |
| Muffler | Metal or plastic |
Kresco 1/2″ diaphragm pump specification sheet.
Pairs With
- Diaphragm pump kit and solvent transfer hose kit for SR30/SR60 auto-fill: the dirty-solvent auto-fill system is controlled by a high-level switch in the boiler, backed by fill-sequence timers in the PLC.
- Solvent recycler parts: lid seals, thermic oil, stainless condenser upgrade kit and solvent recycling bags.
Not sure which pump your recycler uses? Send a photo of the nameplate to our parts desk.
Air-operated diaphragm pump FAQs
What is an air-operated diaphragm (AODD) pump?
An AODD pump uses compressed air to flex two diaphragms back and forth, drawing fluid in and pushing it out through check balls. There is no electric motor, it self-primes and it can run dry without damage, which makes it the standard transfer pump for solvents, paints and slurries.
Is an air-operated diaphragm pump safe for flammable solvents?
Air power means no electric motor in the hazardous area, and this pump uses a PTFE diaphragm and stainless balls compatible with common solvents. As with any flammable-liquid transfer, ground and bond the pump, hoses and containers.
Can I use it as a drum transfer pump?
Yes. Besides feeding Kresco solvent recyclers and parts washers, it works as a general-purpose solvent and chemical transfer pump between drums, totes and tanks, up to 15 GPM.
Need more flow, a 3/8″ pump or a plastic or stainless wet end? See our full line of air-operated diaphragm pumps, including Samoa PIVOT pumps from 3/8″ to 3″.



